6.4 Data fields related to secondary rights time series (for secondary rights)
This section includes the following fields:
| 31 | Time series identification |
| 32 | Business type |
| 33 | In area |
| 34 | Out area |
| 35 | Rights holders |
| 36 | Transferee party |
| 37 | Contract identification |
| 38 | Contract type |
| 39 | Previous contract identification |
| 40 | Measure unit quantity |
| 41 | Auction identification |
| 42 | Currency |
| 43 | Measure unit price |
| 44 | Curve type |
Data Field (31) Time series identification
| No. | Field Identifier | Description |
| 31 | Time series identification | The identification of the time series instance. This must be a unique number that is assigned by the sender for each time series in the document. |
| Description of Accepted Values | Type | Length | Examples |
| Time series Unique Identification | Alphanumeric | Maximum 35 | RS123446928 or 1432_137_42_40_559 |
This field provides a unique number that is assigned by the sender for each time series in the document.
This field is mandatory.
Data Field (32) Business type
| No. | Field Identifier | Description |
| 32 | Business type | Identifies the nature of the time series, e.g. capacity rights, capacity transfer notification, etc. |
| Description of Accepted Values | Type | Length | Examples |
| Refer to ENTSO-E Code list for data interchange document for the valid list of codes. A57 = Resale pricing | Alphanumeric | 3 | A57 |
This field indicates the nature of the time series concerning the rights.
This field is mandatory.
Data Field (33) In area
| No. | Field Identifier | Description |
| 33 | In area | The area where the energy is to be delivered (EIC Y Code). |
| Description of Accepted Values | Type | Length | Examples |
| EIC | Alphanumeric | The maximum length of this information is 16 characters | 10Y0000123456789 |
This field identifies the area where the energy is going (10Y code of area where the energy is going).
This field is mandatory.
Data Field (34) Out area
| No. | Field Identifier | Description |
| 34 | Out area | The area where the energy is coming from (EIC Y Code). |
| Description of Accepted Values | Type | Length | Examples |
| EIC | Alphanumeric | The maximum length of this information is 16 characters | 10Y0000123456789 |
This field identifies the area where the energy is coming from (10Y code of area where the energy is coming from).
This field is mandatory.
Data Field (35) Rights holder
| No. | Field Identifier | Description |
| 35 | Rights holder | Identification of the market participant who is owner of or has the right to use, the transmission rights in question (EIC X Code). |
| Description of Accepted Values | Type | Length | Examples |
| EIC | Alphanumeric | The maximum length of this information is 16 characters | 10X0000123456789 |
This field identifies the Rights Holder by a unique coded identification. Whenever rights are transferred, the Rights Holder is the transferor of the rights.
This field is mandatory.
Data Field (36) Transferee party
| No. | Field Identifier | Description |
| 36 | Transferee party (if applicable) | Identification of the market participant to whom the rights are being transferred or the interconnection trade responsible designated by the transferor (as designated in the rights holder attribute) to use the rights (EIC X Code). |
| Description of Accepted Values | Type | Length | Examples |
| EIC | Alphanumeric | The maximum length of this information is 16 characters | 10X0000123456789 |
This field identifies the Transferee party by a unique coded identification. In certain cases the transferee party also acts as Interconnection Trade Responsible.
This field is mandatory in case of transfers.
Data Field (37) Contract identification
| No. | Field Identifier | Description |
| 37 | Contract identification | The contract identification of the time series instance. This must be the number that has been assigned by the transmission capacity allocator, e.g. the TSO or auction operator, or allocation platform. |
| Description of Accepted Values | Type | Length | Examples |
| Capacity Agreement Identifications (CAI) | Alphanumeric | Maximum 35 | 3105105CY601 |
This field provides the number that has been assigned by the Transmission Capacity Allocator. This field provides identification that uniquely identifies the allocation
This field is mandatory.
Data Field (38) Contract type
| No. | Field Identifier | Description |
| 38 | Contract type | The contract type defines the conditions under which the rights was allocated and handled, e.g. daily auction, weekly auction, monthly auction, yearly auction, etc. |
| Description of Accepted Values | Type | Length | Examples |
|
Refer to ENTSO-E Code list for data interchange document for the valid list of codes.
|
Alphanumeric | 3 | A01 |
This field defines the conditions under which the rights were allocated and handled. The significance of this type is dependent on the in area and out area specific coded working methods.
The Transmission Capacity Allocator responsible for the area in question auctions defines the contract type to be used, e.g.: daily auction, weekly auction, monthly auction, yearly auction, Long-term contract, etc.
This field is mandatory.
Data Field (39) Previous contract identification
| No. | Field Identifier | Description |
| 39 | Previous contract identification (if applicable) | The identification of a previous contract used to identify the transfer rights. |
| Description of Accepted Values | Type | Length | Examples |
| Capacity Agreement Identifications (CAI) | Alphanumeric | Maximum 35 | 3105105CY601 |
This information identifies the previous identification that was used to identify the rights. This is only applicable if there was a change in Contract Identification information.
Data Field (40) Measure unit quantity
| No. | Field Identifier | Description |
| 40 | Measure unit quantity | The unit of measure that is applied to the quantities in which the time series is expressed. |
| Description of Accepted Values | Type | Length | Examples |
| Refer to ENTSO-E Code list for data interchange document for the valid list of codes. | Alphanumeric | Maximum 3 | MWH |
This field indicates the unit if measurement used for the quantities expressed within the time series.
This field is mandatory.
Data Field (41) Auction identification
| No. | Field Identifier | Description |
| 41 | Auction identification (if applicable) | The identification linking the capacity rights to a set of specifications created by the transmission capacity allocator, e.g. TSO or auction operator, or allocation platform. |
| Description of Accepted Values | Type | Length | Examples |
| Unique Identification that clearly identifies the auction to which the bid is addressed. | Alphanumeric | Maximum 35 | AT-CH-M-BASE-------140801-01 |
This field provides a unique identification of the set of specifications that clearly defines the auction to which the capacity rights submitted by the Capacity Trader are to be re-auctioned.
Data Field (42) Currency
| No. | Field Identifier | Description |
| 42 | Currency (if applicable) | The currency in which the monetary amount is expressed. |
| Description of Accepted Values | Type | Length | Examples |
| Refer to ENTSO-E Code list for data interchange document for the valid list of codes. | String | Maximum 3 ISO 4217 | EUR |
This field indicates the currency used for the monetary amount expressed within the time series.
This information is mandatory if available.
Data Field (43) Measure unit price
| No. | Field Identifier | Description |
| 43 | Measure unit price (if applicable) | The unit of measure in which the price in the time series is expressed. |
| Description of Accepted Values | Type | Length | Examples |
| Refer to ENTSO-E Code list for data interchange document for the valid list of codes. | Alphanumeric | Maximum 3 | MWh |
This field indicates the unit if measurement used for the price expressed within the time series (MW per unit, MWh per unit, etc.).
This information is mandatory if available.
Data Field (44) Curve type
| No. | Field Identifier | Description |
| 44 | Curve type (if applicable) | Describes the type of the curve that is being provided for the time series in question, e.g. variable sized block or fixed sized block or point. |
| Description of Accepted Values | Type | Length | Examples |
|
Refer to ENTSO-E Code list for data interchange document for the valid list of codes.
|
Alphanumeric | Maximum 3 | A01 |
This field represents the coded identification of the curve that is described in the Period and Interval class.
If the “Curve Type” element is omitted in the XML instance a default value of “sequential fixed sized blocks” shall be understood. Sequential fixed size blocks (A01) curve is made of successive Intervals of time (Blocks) of constant duration (size), where the size of Blocks is equal to the Resolution of the Period. The value of the Quantity remains constant within each block.
This information is mandatory if available.